Can You Put A Remote Control On Power Wheels?

We may earn commission from links on this page at no extra cost to you. We only recommend products we back!

All the kids love to play with their power wheels; Also, it’s a great way to entertain kids. But when children go for a drive with power wheels, many parents are concerned about their child’s safety.

So, considering the safety of the child, many parents want to add a remote control to their child’s power wheel. So, can you put a remote control on the power wheels? Well, Let’s find out.

Can You Put a Remote Control on Power Wheels?

Yes, you can put a remote control system on a power wheels car. Many Power Wheels car remote control systems become faulty very quickly or the remote control system is damaged due to prolonged use.

Then many people want to add a new remote control system to their child’s power wheels. At first, you have to do is buy a remote control kit from the market that will allow you to add a remote control system to your child’s power wheel car.

These remote control kits come with all the hardware and instructions needed to install a remote control system.

Moreover, these kits are very easy to install and can be installed in just a few minutes. So, let’s find out how a remote control system can be attached to a power wheels car.

How to Put a Remote Control System On Power Wheels

There are a few things to keep in mind when adding a remote control system to your child’s power wheel car.

First, you need to make sure that the kit you buy is compatible with your car model. Second, you need to make sure that the remote control system you purchased has a good range.

The last thing you want is for your child to be driving their power wheel around the car without being able to control it!

At the same time, you will need some tools to install the remote control in the car. So, before you start work, make sure that all the tools below are at your fingertips.

Drill
Electrical tape
Screwdriver
Hand saw

You must collect all of the above tools before starting the remote control installation process. On the other hand, you may have to buy some extra wires, as you may need wires when converting.

Step 1

Before you convert your Power Wheels into a remote control vehicle, make sure it’s clean.

When performing the conversion, be sure to clean your Power Wheels thoroughly because you can find dirt underneath the hood.

You can do this work without anyone’s help, but you must know where to install the remote control system.

However, if you are already familiar with the work of power wheels, then you can easily understand which parts need to be installed.

Usually, installation of the remote control is performed on the dashboard and battery area of the Power Wheels vehicle.

Now you need to remove some parts of the Power Wheels vehicle to access critical areas of the vehicle. First, remove the Power Wheels car seat grille and windshield.

Step 2

Now you can say that your power wheel is ready. you can move on to the next task. Now you can gently remove the old controller parts.

However, it is better if you keep a picture of the whole system as if this picture will guide you when you add the new system.

If your child’s Power Wheels car has a defective part, you can replace it as well. Once you have finished moving everything, you have to flip the car to access the lower parts of the paddle tab. You need to press four tabs to remove the gas pedals from the car.

Now carefully remove all the wires attached to the paddle area and cut off if you see any excess plastic around it.

This is an excellent idea if you don’t have anything in the paddle area, and the plastic will expand at the end of your work, but that’s fine.

Removing all these things from the car ensures that it can no longer be driven. On the other hand, you have to make sure that no electricity is flowing in the unwanted parts and no wires are hanging.

Step 3

Now it’s time to add a new remote control system to the power wheels. When you buy the new remote control kit, it should have an instruction manual.

Make sure the instruction manual is within your reach. Because it will be needed when you install the system.

If you have already taken a picture of the system, keep it with you. Now follow the steps below to install the new remote control system on the Power Wheels car:

First, add the power switch with the power button.
Then add the forward / back / stop switch one by one with the foot paddle.
Now connect the high/low-speed switch to the dashboard.
You can connect music and lights to the dashboard if you want.
Carefully add the steering switch to the motor.
At last, connect the power terminals to the battery very carefully.

Remember, before you move on to the next step, you need to double-check that all of the above steps are fully connected. This is because if the wiring of a cable is loose, then there may be a problem with the power supply.

Step 4

After that, it’s time to connect the receiver. This receiver needs to be connected to your remote controller so that you can tell the power wheels what to do.

The receiver is very small in size, so you need to use electrical tape to attach it to the dashboard. Most remote control servers have ports for two channels.

So use the manual that comes with the kit to connect the receiver to the appropriate channel with your remote control.

Now make sure that the battery is connected to the remote control and the remote is connected to the receiver.

Check to see if the remote control is working. If the remote control doesn’t work, don’t worry, step by step, check if there is any loose connector or if you missed something. Be sure to check the power circuit as the remote will not work if the circuit is incomplete.

If it still doesn’t work, look at the picture you took of the old connections and see if there are any differences, and try to connect them based on the picture. Hopefully, you will succeed.

Step 5

Now that all your work is done and the pairing of the remote controller is complete, you can now go to the test drive. Make sure all the buttons on the Power Wheels car remote work properly. Check all the buttons.

It is important to have a test drive before giving your child a Power Wheels car. If everything in the car is fine after the test drive, now you can give the car to your child to enjoy their drive. If you find any problem in the car, fix it.

Final Thoughts

Remember, you need to buy the remote control system kit depending on the power wheel model. Some models may have a built-in remote control feature; others may not.

It is advisable to check the product manual or contact the manufacturer to determine if a remote control can be added to your specific model. And be sure to keep your power wheels clean so that they will work properly.