Skip to content
logo
  • RC Car
  • Truck
  • Crawler
  • Buggy
  • Ride On
  • Recommended
logo

Click Here To Check Recommended RC

Are Power Wheels Tires Interchangeable?

Edited ByJohn Hours Updated onJuly 15, 2022 Categories Ride On

We may earn commission from links on this page at no extra cost to you. We only recommend products we back!

You’ve always known that power wheels are incredibly long-lasting and can run without maintenance for years. Now you’ve just learned that the tires on your child’s power wheel need to be replaced.

You’re considering switching out the tires on a used power wheel for those from another kid’s vehicle. But Are Power Wheels Tires interchangeable? Keep reading the article to know more details.

Jump To Right Section
  • Are Power Wheels Tires Interchangeable?
    • How To Replace Tires Of A Power Wheels Car?
    • Step 1: Need to Prepare
    • Step 2: Place the Power Wheel
    • Step 3: Remove Old Tires
    • Step 4: Install New Tires
    • Step 5: Test the New Tires
  • Is It a Good Idea to Change the Original Tires?
  • Final Thoughts

Are Power Wheels Tires Interchangeable?

Unfortunately, the answer is No. You cannot interchange your power wheels tire with a different model of power wheels. Because the manufacturers make specific tires for a certain model of power wheel. 

Are Power Wheels Tires Interchangeable

You may find tires for your child’s power wheels that look similar to other power wheel tires. However, it is never a good idea to exchange the tires on a power wheel.

If you try to replace tires on different types of power wheels, the vehicle’s performance will be affected. Furthermore, when you use a different kind of power wheel, the danger of accidents rises. The solution is to utilize new tiers of the same power wheel model or upgrade the tire you want to replace.

How To Replace Tires Of A Power Wheels Car?

Replacing Power Wheels car tires is not a difficult task. Most power wheels need to be assembled after purchase. If you have already done this, it will be very easy for you to do this now.

To do this, you will need a flat face screwdriver and a hammer. However, you can replace the toy car tires of your little one without the help of a handyman by following these steps.

Step 1: Need to Prepare

First, you need to be equipped with all the necessary equipment and a compatible new tire to replace the faulty tire on the power wheel.

You must ensure that the new tires are compatible with the correct model of wheel power. You need to measure and compare new tires with old tires in your power wheels to do this.

The most fantastic approach to ensure that the tires are appropriate for the power wheel is to purchase them from the car’s manufacturer.

Before beginning, clean the power wheel using a sopping wet cloth. When replacing a tire, you feel much more at ease if the power wheels are clean.

Step 2: Place the Power Wheel

This is where it’s essential to be cautious when removing and replacing the wheels of a power wheel. You’ll want to turn the toy car upside down in order to replace its tires.

However, you cannot do so because it may damage the body, steering, or any other component of the power wheel. The power wheel must be positioned in such a way that all of its tires are free from the weight of the car.

Furthermore, the position of the power wheel should allow you to access all of the tires easily. One option is to utilize tiny stools placed in the middle of the car to keep it elevated and steady.

Another option is a mini-jack that may be used to lift the power wheel. If you’re confident that the jack won’t damage the soft materials of the power wheel, you may utilize it.

Step 3: Remove Old Tires

Now that the car is in a stable position and all of the tires have been relieved of the vehicle’s weight. You may begin to remove the old tires that you have to replace. Now remove the retainer caps first.

Using the flat-blade screwdriver, make a hole between the hubcap and the retainer cap. To raise the retainer cap, put pressure in an angled position.

Put pressure on various locations on the tire to gradually loosen it up. You can now simply open the hubcap once you’ve removed the retainer cap from the car.

The tire is held to the power wheel by a retaining cap and a hubcap. The old tire will come off the car effortlessly after they are removed. Repeat the procedure for all of the remaining old tires.

Step 4: Install New Tires

Now it’s time to install the new tires on the power wheel. Some specific power wheels have wheels of various diameters for their front and rear axles.

You must ensure that you’re using the proper wheel for the axle you’ve chosen. After that, place the new tire on the vehicle. Attach a hubcap to the power wheel using a hubcap. The hubcap should secure the wheel.

The task of attaching the hubcap will need some force. You can apply pressure to the hubcap using your hand if you want to do it yourself.

If you find it difficult to pressurize the hubcap with your hand, a tiny hammer may be used instead. The hammer is effective in breaking apart hard materials, but it can also damage numerous soft components in the power wheel.

Step 5: Test the New Tires

Your work is almost done. Now you just need to check if the power wheel-tire installation is done properly. Since it will run your kids, it should be tested. You can go on a test drive and see if the new tires are behaving abnormally while driving.

Also, check the rotation of the tires before starting the engine of the power wheels car and also see if all the tires of the car are rotating at the same speed.

Generally, it may take some time to get used to the new tire power wheel. So, take some time to check the wheels of the power wheels. If all goes well, you can let your child drive now.

Is It a Good Idea to Change the Original Tires?

Tires on a power wheel for kids are frequently changed whenever the rubber ones wear out, and if this happens, you may consider replacing them.

You can upgrade the tires with manufacturer-supplied tires. The alternatives include pneumatic or rubber tires. Compatibility tires can be found easily on Amazon and other internet retailers.

If you want to replace your power wheel tires with rubber-made ones, you can do so without spending too much. On the other side, upgrading your child’s power wheels with pneumatic tires will improve their performance.

The only disadvantage of pneumatic tires is that they must be modified before being installed on your child’s power wheels.

Keep in mind your child’s specific demands for riding the power wheel as you upgrade the tires. The surface on which the power wheel runs most of the time is essential to consider.

Final Thoughts

After all, no matter how strong the wheels of the power wheels car. Some of your child’s misbehavior may harm them.

Therefore, you need to know how to change and upgrade the tires of a Power Wheels car. We believe that this article has helped you a lot as well as hope that you are now able to change the wheels of your child’s power wheels car.

John

Chief Editor @The RC Valleys (or, in plain English, I'm the guy responsible for ensuring that every blog post we publish is helpful for our readers.

Post navigation

Previous Previous
What Age Is Appropriate For Power Wheels?
NextContinue
What Is The Difference Between The Power Wheels Dune Racer And Dune Racer Extreme?
  • Do All Power Wheels Take The Same Battery?
  • Can I Use A Car Charger To Charge A Power Wheels Battery?
  • How Do I Know When My Power Wheels Battery Is Charged?
  • Can You Put Rubber Tires On Power Wheels?
  • How Fast Does The Power Wheels Dune Racer Go?
  • About Us
  • Contact Us
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclosure
  • Sitemap

Copyright © 2022 by The RC Valleys! We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

  • RC Car
  • Truck
  • Crawler
  • Buggy
  • Ride On
  • Recommended
Search