Can You Replace Wheels On Power Wheels?
We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
If you’re the parent of a child who loves Power Wheels, you know that those battery-powered vehicles can get a lot of use.
And if your child is like most kids, they’ll want to ride their Power Wheels all year long, no matter what the weather.
But what do you do when the weather turns bad and your child can’t ride their Power Wheels because the wheels have frozen or iced over?
Can You Replace Wheels On Power Wheels?
Yes, you can replace the wheels on the power wheel. The wheel rims on a Power Wheels vehicle are fixed differently than those on an ordinary automobile since they are composed of different materials and sizes.

You may change the wheels on your child’s toy car in only a few minutes with the aid of a professional.
You will need some tools for this procedure. In doing so, you may also clean out the axle and underbelly of the vehicle.
Below we will provide detailed guidance on how to change the power wheels wheel. Keep reading the guideline to know how you replace the wheels on power wheels.
Read More: How To Modify Power Wheels To Go Faster?
How Do You Replace Wheels on Power Wheels?
When you are about to change the wheels of your child’s power wheels, make sure you have the following tools and hardware at your disposal before you begin work:
- Wheels (make sure the wheels fit your child’s model)
- A set of screwdrivers.
- A hammer.
- Detergent for cleaning car parts.
- New retainers and hubcaps.
If you have all the necessary tools mentioned above, you can start working now:
Step 1: Choose the Right Place
Of course, you need to choose an ample open space to change the wheels of your child’s power wheels car. It will be convenient for you to work in a large open space.
But if you choose a solid and flat place, it will be convenient to change your power wheel there. On the other hand, you can keep a table with you to keep all the tools and hardware in one place.
Step 2: Elevate the Power Wheels
You may choose to position the toy car on its back so that you can access all four wheels. Ensure the vehicle is secure to prevent the car from falling and damaging other components.
Besides, you may also use a mini jerk to raise the vehicle off the ground. Be cautious about attaching the car jerk beneath the automobile to avoid damaging plastic components.
Read More: 12 Volt Vs 24 Volt Ride On Toys
Step 3: Remove the Wheel Parts
The most challenging part of the process is determining how to elevate the car securely. Now remove the hubcaps and retainers with a flat face screwdriver. Insert a flat face screwdriver between the retainer and hubcaps to remove the retainer cap.
If the retainer cap is not easy to remove, you may need to apply more force and repeat the procedure.
Retainers and hubcaps are the components of the power wheels’ rims that must be removed to remove the tire. Retainers aren’t necessary on all power wheels.
Step 4: Pull Out the Battery
Whenever you do any work on a Power Wheels car, remember to remove the battery from the toy car to avoid safety risks.
Because when you press the power wheel with the hammer to change the tire can sometimes damage the battery.
On the other hand, you may have to flip the car for better access inside the power wheels. For this, you must remove the battery and keep it in a safe place.
Read More: 8 Best Power Wheels 12v Battery Alternative
Step 5: Remove Old Wheels
Now is the time to take off the wheels from your child’s Power Wheels vehicle. Remove four of your child’s Power Wheels rims. Old wheels should be stored in a fixed location so that they do not accidentally get mixed with new ones.
When the wheels are removed, you can see the axles. Clean the axes with a cleaning solution, and a cloth is recommended.
Step 6: Install the New Wheels
Take one new wheel and mount it in one of the front wheel spaces. After the wheel, install a hubcap.
You may push it into place using your hands. If you’re using a hammer, apply only a little pressure so that the plastic pieces don’t get damaged.
Finally, replace the hubcaps. The retaining pins may be challenging to find, but this one-person job shouldn’t take more than 15 minutes. The process entails removing the old retainers and installing new ones to keep the hubcap in place.
After all, this process is complete if you have retainer caps installed. Replace all the remaining wheels of your child’s power wheels in the same way.
Step 7: Recheck the Wheels
All of your efforts have come to fruition. It’s time to inspect the wheels so that they don’t move when the vehicle is on the ground.
This will also aid you in ensuring that your kid moves the toy while you observe to ensure that the wheels are turning correctly.
When Need to Replace the Power Wheels Wheel?
It is very difficult to tell when to change your power wheels. However, there are a few warning points, if you notice these points. You must change the wheel of the power wheels car. Let’s see!
The most prevalent reason for changing wheels is that they lose traction after a long period of usage. If the Wheels become flat or bald, it’s time to replace them. Otherwise, the brakes will not function effectively.
Changing the battery and motor from 6V to 12V or 12V to 24V will significantly improve the speed of your power wheels. If your power wheels have plastic wheels, they won’t provide normal traction, and you’ll need to change them with rubber Wheels.
At last, for a number of reasons, your wheels may be cracked. It is not always necessary to replace a damaged tire since it can often be repaired. If you are unable to repair the cracked wheels, they must be replaced.
Read More: How Long Does A Power Wheels Battery Last?
FAQs
What Is The Size Of Power Wheel Wheels?
The size of the power wheels varies depending on the vehicle model. Some power wheels have 12 “wheels, but many have 14” or even 16 “wheels.
If you know your child’s power wheels are useless. You can then check the owner’s manual or contact the manufacturer to find out the specific wheel size of your power wheels.
When Do You Need To Change The Rims Of The Wheels?
When your rims are damaged, unfit to keep air, or cause braking and handling difficulties, they must be replaced.
Even if the leak appears slow or the fracture seems minor; a worn or broken rim might result in a sudden tire failure. If you’re not sure whether you need a new set of rims, get expert advice.
When Do Your Wheels Need Replacing?
If you frequently drive on rough roads, you may need to replace your wheels more often. Besides, how often you need to replace your wheels also depends on how often you use your car and how you drive.
On the other hand, the general rule of thumb is to replace your wheels when they have worn down to about 2/32 of an inch of tread remaining.
If you’re not sure when your wheels need to be replaced, you can always consult with a mechanic or tire specialist.
Conclusion
As you can see above, replacing the wheels on a power wheel can be a relatively easy task, depending on the model. Some power wheels require the removal of the entire wheel assembly, while others require the removal of just the wheel.
Overall, replacing the wheels on a power wheel is a relatively simple task that can be completed by most users.