We may earn commission from links on this page at no extra cost to you. We only recommend products we back!
Kid’s power wheels are equipped with powerful batteries. Power wheel batteries may overheat while charging or while driving.
Then a fuse is needed to protect it from overheating or defects. Do many people want to know if there is a fuse in the power wheel? Let’s find out!
Is There a Fuse on Power Wheels?
Yes, the power wheels have fuses. Thermal fuses play an essential role in power wheel cars. Power wheels have a fuse that connects the positive and negative terminals of the battery so that the electrical system of the electric vehicle is not damaged due to the increase in electrical power.
If you want to find it, you need to start by checking the terminals connected to the battery. However, the power wheels may have several fuses depending on the number of batteries in the vehicle.
What Causes Power Wheel Fuse Damage?
Many things can cause the thermal fuse to be damaged, but you can avoid these problems if you want. Let’s take a look at the reasons why the thermal fuse of your Power Wheels car may be damaged.
The Power Wheels may be overloaded, one of the most common causes of malfunction. Overload occurs when a toy vehicle has more weight than it was designed for.
Probably, its passenger load exceeds the recommended maximum limit of 70 kg, or there is something heavy in the tow.
The thermal fuse may overheat and malfunction as a result of driving on an unsuitable surface. If the road is too rough, then the fuse may come loose and fall off.
If the surface is wet and water splashes on the thermal fuse or the metal strip surrounding it, it can short the fuse.
If your youngster has played with their Power Wheels in a particularly wet or harsh environment, the power switch may have fried.
Erosion or Disconnection of Wires
Corrosion on the wires connecting the fuse to the power supply and the metal strip surrounding it is possible. If they get wet or if anything is spilled on them, they could solidify and become hardened.
It may shatter the connection and flow of electricity, resulting in blown fuses or a metal strip.
If you notice that the car does not seem to be getting any power, it may not be a fuse problem but a battery problem. If the switch is left on, the battery may go bad suddenly or a fuse blow.
The Power Wheel battery may need to be recharged or changed. If the Power Wheels battery goes dead again after being charged overnight, it’s probably time to get a new one.
Power wheels car fuses can control the gearbox and prevent the car from moving the way it should. The gearbox plays an essential role in how well your child’s power wheels will run.
Anything controlled by the gearbox will not operate if a fuse for the gearbox is lost or has blown. That implies that the ride-on vehicle will be unable to move forward or backward, as well as wheels won’t spin.
Read More: Can You Replace Wheels On Power Wheels?
How To Replace Power Wheels Thermal Fuse?
You can replace a power wheel fuse as a DIY project if you have all the right supplies and equipment. Replacing the fuse may require a screwdriver, pliers and a crimping tool.
However, before you can begin the process of installing the Power Wheels car fuse, you need to collect a fuse suitable for the car model. Remember you must turn off the power wheels before replacing the thermal fuse. Let’s see how you can change the fuse of your Power Wheels car.
- Start by checking the positive and negative terminals on the fuse, then write one wire with white tape. Marking the wires is helpful for power wheels that don’t come with the vehicle’s standard red and black wires.
- Remove the blown-out thermal fuse with a screwdriver and dispose of it safely.
- Check that the wires are compatible with the new thermal fuse’s terminals and plugs. You might need to strip the wires and install a plug that matches the terminals of the new thermal plug. Instead of using pliers, use a crimping tool to secure the terminal connections on wire instead of wire cutters.
- Before shutting the top of the thermal fuse, connect the negative and positive wires to their appropriate terminals. An indicator on the end of each wire shows where it should be connected. Connect the cables on the other side of the fuse and ensure that the wiring system appears to be. You may take a photo at the beginning of the procedure to compare the connections after installation.
- Test the Power Wheels’ battery to see whether the vehicle will start again.
Hopefully, you will be able to easily change the Thermal Fuse of your Power Wheels car by following the instructions above.
How to Check Power Wheels Car Fuse
Follow the steps below to check the power wheels car fuse:
- Please remove the battery from the ride-on toy’s battery compartment and pull it out.
- Set it on a level surface with the top facing up to connect the positive cable to the battery. The battery’s fuse box is positioned at the top of the power wheel battery.
- Using your fingers, withdraw the battery’s fuse. You may also utilize needle-nose pliers for this task.
- Examine the wire or the metal strip in the center of the fuse after removing it.
- If the wire is still in place, your fuse is probably in good shape. If the wire has been damaged, the fuse must be replaced.
Is it Important to Check the Power Wheels Car Fuse?
It’s critical to check the fuse on your Power Wheels to ensure proper operating conditions and assure your child’s safety.
After all, fuses help avoid damage to the toy and any other equipment caused by electrical overloading.
Also, fuses are used to help protect equipment users from electrical shock. It lowers the danger of electrical shock to your child while they ride their Power Wheels vehicle in this case.
Before using the ride-on toy, make sure that the Power Wheels fuse is intact before you charge the battery.
Because a blown fuse might indicate that a severe problem has emerged, you’ll need to check if it’s blown.
If this is the case, you must correct the problem before any significant damage to the Power Wheels occurs and before your kid’s safety is jeopardized.
However, there isn’t always cause for alarm. That’s because a blown fuse isn’t always an indication of trouble with your Power Wheels or equipment. Fuses do deteriorate with time; as a result, they must be replaced eventually.
If the new fuse blows right after the old one is replaced, you shouldn’t replace it anymore. To discover what’s wrong with your gear and repair it, you’ll need to call a professional.
In short, keep in mind that repairing your power wheels can be very expensive, so taking good care of them is essential. For this, take care of the toy car in advance and fix it immediately if there is any problem.
As mentioned above, the problem with the fuse that we have discussed is due to not taking proper care of the power wheels vehicle. So, check batteries, fuses, motors, electrical equipment, and gearboxes to avoid problems.